Booting on target hardware¶
Login as user
On the ARP there are three options available for booting:
USB: Boot from a USB-stick by simply inserting said USB-stick into one of the USB ports on the ARP. Make sure that USB is set as boot source in BIOS/u-boot
SD-card: Insert the SD-card into the slot labeled "SMARC SD" located next to the USB ports. This feature requires ARP version >= 1.5.
EMMC: On most SMARC devices there is an EMMC which can be used for booting. This is the boot option with best performance. However, it requires some setup to get the PELUX image on to the EMMC. An example of such a setup would be putting the image in question on to a USB-stick with containing Ubuntu-live, boot into the Ubuntu live mode and use dd to write the image onto the EMMC.
Plug in the USB-stick and boot the target, make sure to configure EFI to boot from USB. No other actions should be needed.
Raspberry Pi 3¶
Insert the SD-card into the Raspberry Pi and boot it up. Make sure to use the HDMI output.